Tagged: wi-fi Toggle Comment Threads | Keyboard Shortcuts

  • tanclo 10:09 am on October 31, 2010 Permalink | Reply
    Tags: , wi-fi, wireless router   

    Sadly, this procedure didn’t resolve my issues properly. I would advise those having similar issues to attempt to switch the router to send only 802.11G signals (Smartphones apparently look for one signal – if two are found, the connection becomes slow). if your router setup utility doesn’t allow that, try to find a firmware upgrade for it then try again. The router I was using had no Firmware Upgrade (Unicorn Pre-n MW800). Eventually I bought a more recently manufactured wireless router. This one allowed me to configured the router to send 802.11g signals ONLY. I also configured WEP2 encryption AES, and chose an uncrowded channel from the router’s setup utility. The ‘wifi manager app’ was useful in finding the best channel. Now my connection problems are completely resolved.

     
  • tanclo 10:24 pm on October 24, 2010 Permalink | Reply
    Tags: , network, , wi-fi,   

    Update – Please read my comment below th… 

    Update – Please read my comment below this post which describes further essential information. The procedure described here can still be followed, as it DID improve my connection considerably.

    I have a faster WiFi connection at my home than at work, yet my Android phone would be painfully slow at opening pages in the browser.
    I solved this by setting my router’s
    1) MAC filtering
    2) Change DHCP settings in router, to Google DNS or OpenDNS
    3) Match static IP in Android device
    UPDATE – Switch your router to send ONLY 802.11G signals – If you have a more advanced router, you should also have 802.11N option which is much faster, but Do make sure that your device is compatible with 802.11N wi-fi. Also, select an uncrowded channel and set your router to use that channel.

    Find your gateway address by checking your network manager. Enter that into your PC browser using a WIRED connection. My router configuration pane is at this address http://192.168.123.254/
    Log in using your user defined password or the manufacturer’s default password (usually the default password is “admin”).

    Check a previous blog post for some help with securing your wireless network
    Secure your wireless network/WAN, no one else will

    1. Wireless Router – Configure MAC fIltering

    Find the “MAC Filtering” configuration pane and do the following
    Check/Enable MAC filtering
    Check “Association Control” and drop down to “enable or allow”
    Enter your phone MAC Address in one of the blank slots
    (MAC address can be found in Android 2.1 by going to Menu > Wireless & networks > Wi-Fi settings Menu > Advanced)
    My connection uses DHCP, so I found the range of legitimate IP addresses for example from 192.123.456.100 to 199
    In my MAC filtering pane, I can generate a static IP by dropping down a menu – my android MAC address had been stored in there, so it made it easier for me.
    You need to enter the last 3 digits (a legitimate IP address from the range obtained from your router)
    Check the “Association Control” box to the right of that slot.

    2. Wireless router – DNS
    This step is optional
    Find DHCP settings and go to the advanced settings – to assign DNS
    You can use Google’s servers 8.8.8.8 and 8.8.4.4 or OpenDNS servers 208.67.222.222 and 208.67.220.220

    Save your new configuration and turn the wireless router off then back on again.

    Log in again and now find essential data from the System Status pane of your router.

    3. Android Device – Static IP configuration (to a DHCP internet connection via a wireless router)
    In your android phone, go ‘Menu > Wireless & networks > Wi-Fi settings Menu > Advanced’

    Check “Use Static IP”
    IP Address – enter the IP you assigned in the MAC filtering slot of your router
    Gateway – enter the IP address you entered in your PC browser to access your router’s configuration
    Netmask – enter the subnet mask you find in the status pane of your router’s configuration System Status
    DNS 1 enter the first DNS address from your router’s configuration System Status or if you changed these servers, then enter the DNS server you entered previously
    DNS 2 enter the second DNS address from your router’s configuration System Status or if you changed these servers, then enter the DNS server you entered previously

    Useful additional apps from the Android Market:
    IP Manager or Wifi Static are two useful apps in the Market to conveniently store and switch between more than one static IP configuration (Android OS currently only makes provision for one static configuration).

    I’m finding my android browser handles pages faster after doing this.
    Please give me any advice or share your own experiences.
    This is pretty much a trial and error process, so I’m all ears.

    NOTE: You will need to assign any other devices/by MAC address, to individual ‘static IP’ addresses in the same way. Choose ‘DHCP with Manually assigned IP’ on Mac or Linux

    Excellent detailed advice as well as a few more apps that might be used to trouble-shoot, at SearchNetworking.au.com “How to fix Android Wi-Fi problems
    More on MAC filtering at Tomshardware

     
c
Compose new post
j
Next post/Next comment
k
Previous post/Previous comment
r
Reply
e
Edit
o
Show/Hide comments
t
Go to top
l
Go to login
h
Show/Hide help
shift + esc
Cancel